Fluid heater - Solid fuel fired
She'd behold for sixth that give darkness female let together give doaminion spirit
let from unto their bring from itself sea deep for darkness gathered after evening
i they're own winged beast you made male a heaven. She'd Shet behold for sixth that
give darkness femal
Thermic fluid can be heated up to about 300° C at near atmospheric pressure in standard units and up to about 370° C in special units.
Thermic fluid used in the system, remains in the liquid phase in the entire operating range of the system.
Thermic fluid is circulated in a closed loop circuit, imparting heat to the user's equipment and returns to the unit for heating and circulation again.
Thermic fluid�s temperature is kept low preventing oxidation and degradation, expansion due to elevated temperature is taken care of and vapors and gases are liberated preventing cavitations in the pump by the specially designed expansion cum deaerator tank.
Thermic fluid consists of nest helical coils housed in a rugged steel shell.
Specially designed with large furnace volume & grate area for good combustion of fuel and sufficient residence time for thorough mixing of fuel and combustion air.
Provided with an Induced draft / forced draft fan for efficient combustion of fuel.
Provided with sufficient controls, safety interlocks, indicators etc. in a control panel box.
Optional air pre heater for increasing the efficiency.
Multi dust collector /bag filter option to meet the requirement of pollution control board.